-40%

Pump - Peristaltic Pump - Elro 1 1/4"

$ 3154.8

Availability: 100 in stock
  • Brand: Elro
  • Condition: Good working condition
  • All returns accepted: ReturnsNotAccepted

    Description

    Depa Elro IP 200, 1 1/4" Peristaltic Pump -
    Elro IP Peristaltic type pumps have no valves, seal or glands and the pumped media only contact the pump hose.  Simple to install, easy to operate and requiring low maintenance, the Peristaltic type pumps is the solution to the most difficult pumping application.  Suitable for the Chemical, Paper, Soaps & Detergents, and Waste Processing industries.
    IP 200 Pump:
    Flow Rate (max):  8.8 gpm;  Hose dia:  1.18 in.;  suction/discharge connections (male thread)  1 1/4 in;  Power required at 87 psi discharge;  1.5 HP;  Max. operating temperature:  Dependent on medium as well as hose material selected. (Up to max of 176 degrees F);  Suction Lift:  31' water column; Hose materials:  Dependent on medium, the following materials are suitable:  Natural rubber, Nitrile, Butyl and Hypalon, EPDM.